B.E. AUTOMOBILE – Research & Development

Research & Development

VARIOUS FUNDED PROGRAMMES ORGANIZED

Students Projects

Research Publications

  1. P.V.Nandhakumar, P.Manavalan “Mechanical Model of Jute Reinforced Polymer Composites using RSM in Milling” Journal of XI’an University of Architecture & Technology Volume 9, Issue 7, Pages 275-281, 2020. 
  1. P.V.Nandhakumar, N.Karthikeyan, “Tests on Glass Fiber Reinforced Polymer with Copper Insert” Compliance Engineering  Journal, Volume 7, Issue 7, Pages 144-119, 2020.
  1. Nandhakumar.P.V, Karthikeyan.N, Prabu.M “Study of Mechanical Properties on AA5052, SS304 and S553 Sheet by Incremental Forming” International Journal of Latest Technology in Engineering, Management & Applied Science Volume 6, Issue 1, Pages 1091-1094, 2018.
  1. Nandhakumar.P.V, Karthikeyan.N, Selvaraj.B, Chellaperumal.D “Fabrication of Composite Plate using Palm Tree Fiber Reinforced with Glass Fiber and Testing its Mechanical Properties” International research Journal of Engineering and Technology Vol.6/Issue 7, 2019.
  1. Karthikeyan.N, Nandhakumar.P.V, Ekanthamoorthy.J , Selvaraj.B ”Characterisation Study of Metal Matrix Composite of Aluminium+Fly Ash+Sic Using Stir Casting Method” International research Journal of Engineering and Technology, Vol.6/Issue 7, 2019.
  1. Chellaperumal.D, Karthikeyan.N, Nandhakumar.P.V, Ekanthamoorthy.J, ”Fabrication and Mechanical Testing on Natural Fiber Composite” International research Journal of Engineering and Technology Vol.6/Issue 7, 2019.
  1. A.Arul Jothi “Investigating the properties of Al-Cu alloy by sintering technique” International Journal of Science and Engineering Research No. 1(4), pp. 161-166, 2020.
  1. A.Arul Jothi “Effect of Heat treatment process on mechanical properties of low carbon steel” Journal of Xi’an university of Architecture. Vol.6 / Issue 2, 2020.
  1. A.Arul Jothi “Analysing the buckling strength of stiffened steel plates under unilateral longitudinal compression” Journal of Xi’an University of Architecture. Vol.6 Issue 2, 2020.
  1. Mr.P.Manavalan, A.Aruljothi “Analyzing the Mechanical and Physical Properties of Aluminium – Copper Alloy Prepared by Sintering Technique” Journal of Xian university of Architecture. Vol 12 Issue 6, 2020

Conference Proceeding

  1. B.Madhanraj, S.Purushothamman “Effect of Heat treatment process on Mechanical properties of Low Carbon Steel” 4th International Conference on Recent Trends in Science, Engineering and Management on 14/08/2020 organised by Karpaga Vinayaga College of Engineering and Technology.
  1. B.Sathish, D.Jayakumar “A Comprehensive Study on Electric and Hybrid Vehicles” 4th International Conference on Recent Trends in Science, Engineering and Management on 14/08/2020 at Karpaga Vinayaga College of Engineering and Technology.
  1. M.Adithyan, S.Akilan “Determination of Buckling strength of stiffened panels under longitudinal compression” 4th International Conference on Recent Trends in Science, Engineering and Management dated on 14/08/2020 at Karpaga Vinayaga College of Engineering and Technology.
  1. Revanth.R, Manojdev.D “Design and development of commercial Utility Solar Vehicle National Conference NITCOM 2020 on 10/03/2020 at Hindustan Institute of Technology.
  2. Sairam.S, Periyandavar.S “Effect of Methyl Alcohol in Direct Injection Diesel Engine with Tamanu Oil Biodiesel as Alternative Fuel” International Conference on Engineering and Technology ICEAT 2020  on 4/03/2020 & 05/03/2020 at Selvam College of Technology, Salem.
  1. Aravinth, Kanishkar.B “Performance and Emission Test of Dual Fuel Engine Virtual National Conference on Innovation in Engineering and Technology” on 28/03/2020 at Narasu’s Sarathy Institute of Technology, Poosaripatti, Salem.
  1. Sathish.B, Akilan.S “Latest development in microalgae-biofuel production with nano-additives” National Conference On Recent Developments In Mechanical Engineering And Modern Techniques Ncrdmemt 2020 on 6/03/2020 at Pt Lee Chengalvaraya Naicker Engineering College, Chennai, Tamil Nadu. 
  1. Jayakumar.D, Vignesh.G “An Overview of Biofuel as a Renewable Energy Source Development and Challenges” RRET’19 International Conference on Recent Researches in Engineering & Technology-2019 on 30/9/2019 at Dr.Kalam Institute of Engineering Research, Chennai.
  1. Dhivakar.S, Ezhumalai.P “Fuel efficiency improvement in petrol engine by using Water Air injection” ICMSMT 2019 on12/04/2019 at Sri Shakthi Institute of Engineering and Technology.
  1. Sathrack.J, Vignesh.E “Single cylinder Four stroke Turbocharged SI engine” VITECON 2018, on 31/03/2019 at VIT University.
  1. Azhaghuvel.G, Prakash.V “Automatic Tyre Pressure Inflation system” 3rd International Conference on Recent Trends in Science, Engineering and Management on 23/03/2019 at Karpaga Vinayaga College of Engineering and Technology.
  1. Jayasuriya.R, Rakesh.R  “Dual Fuel Gasoline Engine on Gas” 3rd International Conference on Recent Trends in Science, Engineering and Management on 23/03/2019 at Karpaga Vinayaga College of Engineering and Technology.
  1. Sundararaman.G, Karthikeyan V “Characterization of large format lithium ion battery exposed to extremely high temperature” 3rd International conference on Recent trends in science, engineering and management on 23/03/2019 at Karpaga Vinayaga College of Engineering and Technology.
  1. Kanishkar B, Revanth R “A brief review on key technologies in the battery management system of electric vehicles” 3rd International conference on Recent trends in science, engineering and management dated on 23/03/2019 at Karpaga Vinayaga College of Engineering and Technology.
  1. Arun.A, Balaji.C, Bharath.ES “Properties and analysis of composite materials” 6th International Conference on Contemporary Engineering and Technology dated on 21/03/2018 at Prince Shri Venkateshwara Padmavathy Engineering College, Chennai.
  1. Balaji.P, Dhilipkumar.P “Static stress analysis of connecting rod using finite element approach” National Conference on “Advanced Engineering Technology” on 15/03/2018 at Meenakshi Sundararajan Engineering College,  Chennai.
  1. Hariharn.C, Aravind Balaji.N “Experimental investigation method of aluminum alloy with Al2O3 and fly ash for making piston by stir casting method” National Conference on “Recent Advances in Science, Engineering and Management on 28/03/2018 at Tagore Engineering College, Chennai.
  1. Anand kumar.D, Kirubanithi.K “Design and Fabrication of Multipurpose three wheeler hybrid vehicles” National Conference on Engineering Applications-NCEA 2018” on 16/03/2018 at Universal College of Engineering and Technology, Tirunelveli.
  1. Vigneshwaran.S, Subash.M G “Static Analsyis of Car Bumper” National Level conference on Advances in Mechanical Engineering 2018 dated on 01/03/2018 to 02/03/2018 at Sona College of Technology, Salem.
  1. Revanth.R, Sundararaman.G “Technical Challenges for Using E-Rickshaw as a Mode of Transport on Indian Roads” National Conference and Workshop on Emerging Trends in Mechanical Engineering dated on 13/02/2018  at CARE group of Institution, Trichy.

MOU

  1. HEXADOF Pvt Ltd, Nungambakkam, Chennai
  2. Industrial Engineering Quality Solution, Poonamallee, Chennai
  3. CAPCP India (P) Ltd., Ambattur Industrial Estate, Chennai
  4. Top Engineers, Chennai

Patent

Dr. S. Karthikayan, Professor & Head

1.Published patent in the title of Gas Lighter with Leakage and Level Monitoring System, in Official Journal of the Patent Office, issue no.: 20/2020, dated 15 – 05 – 2020. Patent published.

2. Published Patent in the title of Spherical Dome Oscillating Wave Energy Conversion Device, in Official Journal of the Patent Office, Issue no.: 23/2020, dated 05 – 06 – 2020. Patent published.

3. Patent Filled in the title of Telemonitoring Device by using Telemetry for Health Monitoring and Forecasting System, in Official Journal of the Patent Office, Patent Status: Successfully Filed with Early Publication Request.

4. Published Patent in the title of Non Pneumatic Resilient Tire, in Official Journal of the Patent Office, Issue no.: 41/2020, dated 09 – 10– 2020. Patent published.

5. Published Patent in the title of Novel Development Process for Homogeneous Distributions of Nano-particles with Aluminium Alloys, in Official Journal of the Patent Office, Issue no.: 46/2020, dated 13 – 11– 2020. Patent published.

6. International Patent filled in the title of An Electric Vehicle Battery Temperature Detection by Using High ZT Value of Silicon Crystal. Australian Innovation Patent Application number – 2020104212 filled on dated 21.12.2020.

Books Published

  • Basic Civil & Mechanical Engineering, For I Year Circuit Branch – Anna University Students ISBN No. 819085670 – 7, 2010, VK Publication.
  • Basic Civil & Mechanical Engineering, For I Year Circuit Branch – Anna University Students, 2008, DD Publication.
  • Computer Aided Drafting and Modelling Laboratory – Manual, Non – Circuit Branch – For I Year Anna University Students, 2008, DD Publication
Admission